Properties settings for using BLP Eclipse 4/8 with Elite 600 Windows 95 driver.

• General
  • Comment: blank
  • Separator Page: [none]
• Details
  • Port: LPT1: [Printer Port]
  • Driver: GCC Elite 600 v1.1
  • Timeout settings:
    • Not selected: 15 seconds
    • Transmission retry: 45 seconds
  • Spool settings:
    • x Print directly to the printer
    • x Disable bi-directional support for this printer
  • Port settings:
    • x Spool MS-DOS print jobs
    • x Check port state before printing
• Paper
  • Paper size: US Letter
  • Layout: 1 Up
  • Orientation: Portrait
  • Paper source: Autoselect
  • Copies: 1
• Graphics
  • Resolution: 300 dpi
  • Halftoning: Use printer's settings
  • Special: none
  • Scaling: 100%
• Fonts
  • x Always use built-in printer fonts instead of TrueType fonts
• Device Options
  • Available printer memory [in KB]: 1279
  • Printer features:
    • Paper Reserve: Disabled
  • Installable options:
    • Lower Paper Tray: Not Installed
    • Multi-Purpose Feeder: Installed
    • VMOption: Standard 4MB
• PostScript
  • PostScript output format: PostScript [optimize for portability-ADSC]
    
  • PostScript header: Download header with each print job
    
  • x Print error information
    
  • PostScript timeout values:
    • Job timeout: 0 seconds
      
    • Wait timeout: 240 seconds
  • Advanced:
    • PostScript language level: Use PostScript Level 2 features
    • Bitmap Compression: Compress bitmap images
    • Data format: ASCII data
    • x Send CTRL-D after job